3D PRINTING SERVICE
Seven processes, no machine change-off — pick the most economical one for your part.
From photosensitive resin to metal powder, we run a full in-house process matrix rather than a single machine type: SLA high-resolution resin for cosmetic parts, SLS/MJF nylon for functional structural parts, metal SLM for temperature- and load-bearing parts, FDM for large low-cost parts. Same drawing, our engineers give process selection advice and cost comparison — no trial and error across suppliers.
ProcessesSLA/DLP resin, SLS/MJF nylon, SLM/DMLS metal, FDM
PrecisionResin ±0.1 mm; nylon ±0.2 mm or ±0.3%; metal ±0.1–0.2 mm
LayerResin 0.025–0.1 mm; nylon 0.06–0.12 mm; metal 0.02–0.05 mm
Best for · appearance verifiers, structural/functional parts, assembly validation, low-volume end parts
DELIVERY SPEED
24-hour samples, compressing design iteration from weeks to days.
No molds and no scheduling wait — orders enter the print queue the same day the drawing ised; resin parts ship as fast as 24 hours. Design revisions need no new tooling: change the file, print again, letting appearance review, assembly validation and market tests run three rounds in a single iteration cycle.
Sample leadResin 24–48h; nylon 3–5 days; metal 5–7 days
RushSame/next-day rush supported
Rev. costZero tooling cost, revise-and-print; iteration costs only material & labor
Best for · concept validation, show units, design review, tender demo parts
DESIGN FREEDOM
No draft angle, no “this can’t be made”.
Additive is free of draft, parting lines and tool-access limits: lattice, conformal cooling channels, merged multi-part assemblies and topology-optimized weight reduction print directly. A part that once needed 8 pieces to assemble can print as 1, cutting assembly steps and cumulative tolerance. We add DFM review and lightweighting advice to make the most of every printable feature.
StructureLattice/lattice-cut, conformal channels, integral forming, internal flow; min wall [0.5–1.0 mm]
Weight cutTypical 30–50% after topology optimization per case
Max sizeResin [800×800×450] / nylon [700×380×580] / metal [400×400×400]; oversized parts split-print + join
Best for · thermal & fluid parts, robotic end-effectors, irregular structural parts, weight-optimized parts
METAL AM · NICHE
Direct titanium SLM — medical implants & aerospace parts at volume.
Metal additive is not a prototyping toy but a production process. We form TC4 (Gr5) titanium, 316L stainless and AlSi10Mg aluminum by SLM/DMLS, covering porous orthopedic implants, surgical guides, aerospace brackets and lightweight topology parts; after stress relief, support removal, bead blasting and dimensional inspection, parts ship with material composition and mechanical-property reports that meet registration and airworthiness file requirements.
MetalsTC4 (Gr5) Ti, 316L SS, AlSi10Mg, Inconel 718, CoCrMo
ProcessStress-relief HIP post-forming per equipment, de-support, bead blast/polish, CMM full inspection
PorousPore 300–600 μm controlled, porosity 50–80%
DocsMaterial composition, mechanical test data, size report, batch traceability
SystemISO 13485 / AS9100 / ISO 9001
Best for · orthopedic implants & surgical guides, dental frames, aerospace lightweight structures, conformal mold inserts
